Samsung HL-S5679W manual D-Net control panel

Using the D-Net

The D-Net control panel

Select an IEEE1394 device from the D-Net device list. The TV will then display the D-Net control panel. This panel allows you to use the TV remote control to control the selected IEEE1394 device.

1 Press the D-Net button on the remote control.

Press the … or † button to select a

2 D-Net (IEEE1394) connected device. Press the ENTER button.

•The D-Net control panel appears on the bottom of the screen.

Use the …, †, œ, √ buttons on the remote

3 control to move through the options (see next page) available in the D-Net control panel.

4 Press the ENTER button to select an option.

To view the IEEE1394 device in FULL SCREEN,

5 press the EXIT button on the remote control.

•To exit D-Net mode, select DTV from the D-Net device list or press the SOURCE button on the remote control.

Copy-free

Copy-free

NOTE

•For information about how to use the icons, refer to the following page.

English - 122