getting started

Available running time for the battery

Battery type

Charging time

BP90A

Approx. 190 min.

(Use the Built-in USB plug)

Mode

Resolution

1080/25P

720/25P

Continuous recording time

Playback time

 

 

Approx. 80 min.

Approx. 140 min.

 

 

Approx. 90 min.

Approx. 150 min.

 

 

Charging time: Approximate time in minutes (min.) required to fully charge a completely exhausted battery.

Recording/Playback time: Approximate time available when you have fully charged the battery.

The times are only for reference. Figures shown above are measured in Samsung’s test environment. Your times may differ depending on your usage and conditions.

The recording and playback times will be shorter when you use your camcorder in low temperatures.

Continuous Recording (without zoom)

The continuous recording time above shows the available recording time when you record without using any other function after recording starts. The battery pack may discharge 2-3 times faster than this reference if you use the record start/stop frequently and the zoom functions, and then playback your recordings. Prepare additional charged battery pack(s) to cover the time you are planning to record on the camcorder.

The charging time will vary depending on the remaining battery level.

Depending on your PC specifications, the charging time can be prolonged.

About the battery

Battery Properties

A lithium-ion battery is small-sized and has a high capacity. Low ambient temperature (below 10º C/50º F) may shorten its life-span and affect its function. Before recording in low temperatures, put the battery into your pocket to warm it, then install it in the camcorder.

20

Page 26
Image 26
Samsung HMX-E10OP/XTR Available running time for the battery, 1080/25P 720/25P Continuous recording time Playback time