Storing Channels in Memory
Press the ▲ or ▼ button to select the antennas to
4 memorize. Press the ENTER button to select “Start”.
In Air, press the ENTER button to start the auto program.
5 In Cable or Air + Cable, press the ENTER button to select the cable system.
Press the ▲ or ▼ button to select “Digital Channel or Analog Channel”, then select the cable system. Press the ▲ or ▼ button to select “Start” and press the ENTER button to start the auto program.
The TV begins memorizing all available stations.
6 Press the ENTER button at any time to interrupt the memorization process.
Press the EXIT button to exit.
Note
•The TV must be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.
T V | Auto Program | ||||
| Select the antennas to memorize. | ||||
| Air |
|
| Start | |
| Cable |
|
| Start | |
| Air + Cable |
|
| Start | |
| Move |
| Enter | Return | |
|
|
|
|
|
|
T V | Auto Program | ||||
Select the cable system. |
|
| |||
| Digital Channel | : STD | √ | ||
| Analog Channel | : STD | √ | ||
| Start |
|
|
|
|
| Move |
| Enter | Return | |
|
|
|
|
|
|
Auto Program
Auto Program in progress.
Air Channel 67
Stop
Enter 
Return
Notes
•All available DTV and analog channels are automatically stored in memory when channels are selected by directly accessing channels.
•It takes approximately 3 to 10 minutes to memorize channels.
43
