Samsung HP-R4272 manual When selecting Cable TV

Press the ▲ or ▼ button to memorize the channels of

3 the selected connection.

Press the ENTER button to select “Start”.

Notes

•If the antenna is connected to ANT 1 IN (CABLE IN), select “Cable” and if it is connected to ANT 2 IN (AIR IN), select “Air”.

•If both ANT 1 IN and ANT 2 IN are connected, select the “Air + Cable”.

•If the CableCARD is inserted into the “CableCARD” slot on the rear panel, “Cable” and “Air + Cable” are not available.

When selecting Cable TV :

Press the ▲ or ▼ button to select “Cable” or “Air + Cable”, then press the ENTER button.

Press the ▲ or ▼ button to select “Digital Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”, press the ENTER button.

Press the ▲ or ▼ button to select “Analog Channel”, then press the ENTER button.

Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”, press the ENTER button.

Press the ▲ or ▼ button to select “Start”, then press the ENTER button to memorize the channels.

Note

•STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory” on page 43.

	Plug & Play
Select the antennas to memorize.
Air	Start
Cable	Start
Air + Cable	Start
Move	Enter	Skip

	Plug & Play
Select the cable system.
Digital Channel	: STD	√
Analog Channel	: STD	√
Start
Move	Enter	Skip

Plug & Play

Select the cable system.

Digital Channel		:	STDSTD	√
Analog Channel	:		STDHRC	√
Start			IRC
Move	Enter			Skip
	Plug & Play
Select the cable system.
Digital Channel	: STD			√
Analog Channel	:		STDSTD	√
Start			HRC
			IRC
Move	Enter			Skip

	Plug & Play
Select the cable system.
Digital Channel	: STD	√
Analog Channel	: STD	√
Start
Move	Enter	Skip
		37