35
Still
Press the Still button on the remote control to freeze a mov-
ing picture. Press again to cancel.
34
Wide
Sets the picture to 16:9 wide mode.
Panorama
Use this mode for the wide aspect ratio of a
panoramic picture.
Zoom1
Magnifies the size of the picture vertically
on screen.
Zoom2
Magnifies the size of the picture more than
Zoom1.
Stretch
Using this mode, magnify the picture vertically
and horizontally to be bigger than the picture
in Zoom2.
4:3
Sets the picture to 4:3 normal mode. This is a
standard PDP screen size.
Changing the Screen Size(When entering the Video mode)
Note
•If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be burned onto
the screen, view the monitor in wide or panorama mode as much as possible.
•In VIDEO, S-VIDEO and Component1 modes, all screen modes can be selected.
(Wide ➝ Panorama ➝ Zoom1 ➝ Zoom2 ➝ Stretch ➝ 4:3).
•In RGB mode, Wide and 4:3 screen modes can be selected.
•The 4:3 mode does not work with input signals from Component2 sources (Set-top box or
DVD players-480p/720p/1080i).
When you press the Aspect or Scaling(RGB mode) button on the remote control, the PDP’s screen
mode should appear in sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2,
Stretch, 4:3.
Freezing the Picture