Selecting a Menu Language
6362
Setting the Multi Control
1 Press the Menu button. Move the joystick up or
down to select “SETUP”, then press the joystick
to enter.
2 Move the joystick up or down to select the
“Language”.
3 Move the joystick left or right to select the appropri-
ate language: English, Spanish, or French.
4 Press the Menu button to exit.
Multi Control
Digital NR
Auto Power On
Panel Lock
Language
Off
Off
Off
English
Multi Control
Digital NR
Auto Power On
Panel Lock
Language
Off
Off
Off
English
1Press the Menu button. Move the joystick up or
down to select “SETUP”, then press the joystick
to enter.
2Press the joystick to enter.
3Enter ID setup number. The ID Setup operates by
using only the joystick.
4Move the joystick up or down to select “ID Input”,
The ID Input operates by using only the
numeric buttons.
5Enter ID Input and the screen with the set ID number
will be switched to the Menu screen.
Note
•To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When
entering the ID Input number of PDP1 while the PDP is set in the ID Input mode, only PDP1 is
switched to the Menu screen and you can operate the remocon. At this time, PDP2 doesn't operate
with the remocon and displays the standby mode of ID Input. (See the figure of step 4.)
Multi Control
Digital NR
Auto Power On
Panel Lock
Language
Off
Off
Off
English
Multi Control
Digital NR
Auto Power On
Panel Lock
Language
Off
Off
Off
English
ID Setup 0 1
ID Input _ _
ID Setup 0 1
ID Input 0
-