Using NCE (Natural Color Expert)
6.Configure the Gamma settings. If you configure LUT, the gamma curve of sRGB will be applied.
Advanced
1.You can perform basic configuration using a single menu screen.
New Profile
(Standard)
Linear Gray
Deep Black
Color Gamut - sRGB Brightness - 150 cd Black Level - Min.
White Point - 6504 K RGB Gamma
Before
To set RGB gamma, drag and drop the control bar, press the left and right arrow buttons, or enter a value in the text box manually. Check the results by looking at the Current image, which the changes have been applied to. The accuracy of the preview shown in the Current image can vary depending on the measurement results of Monitor Measurement. When you have finished making changes press the Next button. To return to the previous step press the Back button.
Gamma
After
Red | Green | Blue |
Back Calibration Cancel
Edit
Color Gamut
[Calibration]
sRGB
R(0.6400, 0.3300) G(0.3000, 0.6000) B(0.1500, 0.0600)
You can adjust the Brightness, Black Level, White Point, and Gamma value. Pressing Preview will show you how your changes will affect the image. The accuracy of the Preview image may vary, depending on the Monitor Measurement result. When you are happy with your changes, press the Calibration button.
Edit | Target | Result |
Brightness
Max.
Black Level
Min.
Set Black Level Control
White Point
Standard
Red | Green | Blue |
RGB Gamma
Preview
Calibration Cancel
7.Start calibration.
Initialize
Measurement | Place a Calibrator | Connect Calibrator. The Connected Calibrator automatically appears in Select a Calibrator. |
Measuring | If several calibrators are connected, then select a calibrator by going to Select a Calibrator | |
| and pressing Next. | |
| Result | |
|
|
Connect a Calibrator
Calibrator
MonitorPC
Select a Calibrator
BackNextCancel
2.Start calibration.
| Initialize | Connect Calibrator. The Connected Calibrator automatically appears in Select a Calibrator. |
Calibration | Place a Calibrator | |
Calibrating | If several calibrators are connected, then select a calibrator by going to Select a Calibrator | |
| and pressing Next. | |
| Result | |
|
|
Connect a Calibrator
Calibrator
Select a Calibrator
Calibration device not found
Back Next Cancel
26
