Samsung SCC-C6407P, SCC-C6475P manual Shutter, Wdr, Manu, Flickerless

For items in the BLC menu, the user can set the size and location of the BLC area by pressing [ENTER] key after put the cursor on USER… using the [Left, Right] key. For SIZE items, you can use the [Up, Down, Left, Right] key to designate the SIZE, and then press the [ENTER] key.

You can set the location for areas using the [Up, Down, Left, Right] key in the LOCATION.

(VIDEO SET)
IRIS	MANU...
SHUTTER	OFF
AGC	OFF
WHITE BAL	ATW1
DIS	OFF
FOCUS MODE	ONEAF

Press the

ENTER button.

(MANUAL)

(ALC)

➜

SIZE

SPECIAL	...
EXIT	QUIT

LEVEL	(00) ----I----
RET

BLC	USER...
LEVEL	(0) ----I----
RET
SIZE

Press [Enter]

➜

Press [Enter]

LOCATION

SIZE

SHUTTER

You may designate both the fast electronic shutter speed and low electronic shutter speed in the SHUTTER menu. The fast electronic shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to be used for the bright and fast video image. The AUTO slow electronic shutter supports 10 shutter speeds from x2 to x160 and sets the shutter speed to be slow In order to make the image on the screen more distinct and brighter when you photograph under dark illumination. If you want to sense the light brightness to control the shutter speed to the brightness automatically, select the AUTO slow shutter.

(VIDEO SET)
IRIS	ALC...
SHUTTER	OFF
AGC	OFF

E

LOCATION LOCATION

Use [Left, Right] key in the LEVEL menu to control the video output level(brightness).

WDR

The WDR camera is a state-of-art technology to expand the screen profit, mostly effective when you photograph both indoor and outdoor. In short, this function provides you with the distinct reproduction of not only the indoor but also the outdoor. Press [ENTER] to set up the WDR leve.

WHITE BAL	ATW1
DIS	OFF
FOCUS MODE	ONEAF
SPECIAL	...
EXIT	QUIT

Keep pressing both Left and Right in the SHUTTER menu, the speed will change in the following sequence.

➝ OFF ➝ AUTO X2 ➝ AUTO X4 ➝ AUTO X6 ➝ AUTO X8 ➝ AUTO X12 ➝ AUTOX16 ➝ AUTO X20 ➝ AUTO X40 ➝ AUTO X80 ➝ AUTO X160 ➝ OFF ➝ 1/100(1/120) ➝ 1/250 ➝ 1/500 ➝ 1/1000 ➝ 1/2000 ➝ 1/4000 ➝ 1/10K

(VIDEO SET)
IRIS	WDR...
SHUTTER	OFF
AGC	OFF
WHITE BAL	ATW1
DIS	ON
FOCUS MODE	ONEAF
SPECIAL	...
EXIT	QUIT

➜

Press [Enter]

(WDR)

LEVEL1	L----	I ----	H
LEVEL2	L----	I ----	H
RET

❈ In case the IRIS mode is set to WDR, only the following modes are

available.

➝ OFF ➝ AUTO X2 ➝ AUTO X4 ➝ AUTO X6 ➝ AUTO X8 ➝ AUTO X12 ➝

AUTOX16 ➝ AUTO X20 ➝ AUTO X40 ➝ AUTO X80 ➝ AUTO X160

❈ If you set SHUTTER to between AUTO X4... and AUTO X128..., FOCUS mode will be

displayed as “MF“ (the product can operate only in MF mode). You can ’t adjust the

settings manually. If you set it to OFF, 1/100(1/120)/10K or AUTO X2..., the product

will recover the previous FOCUS mode.

❈ If you set SHUTTER to between AUTO X2... and AUTO X128..., DIS will be displayed

-LEVEL 1 : Controls the shutter speed while WDR operates.

-LEVEL 2 : Controls the whole brightness while WDR operates.

MANU

When you press [ENTER] key after selecting MANU in the IRIS item, an additional screen appears in which you can set manually opening or closing the IRIS.

as “---“ (it can only operate in Off mode). You can ’t adjust the settings manually. If you

set it to OFF or 1/100(1/120)/10K, the product will recover the previous settings of DIS.

FLICKERLESS

Either NTSC (for 50 Hz)or PAL (for 60 Hz areas)is an anti-flickering system that is designed to avoid image flickering on the screen due to inconsistency between the vertical synchronizing frequency of the picture and the flashing frequency of the lightening. If you select and set AUTO to ON in SHUTTER from VIDEO SET, you can set NTSC or PAL for your area and the auto shutter speed is fixed at 1/100(1/120) second.

3-11 3-12