
User’s Guide
Mounting the SCQ-041P in a Rack
The is a standard
1.Remove the mounting screws from their holes and align each Rack mounting adaptor vertically along the front edge of the
2.Insert the mounting screws through each mounting adaptor and into the corresponding screw holes on the
3.Partially tighten the screws so that they are holding the adaptor loosely in place.
4.Adjust the mounting adaptor the front of the adaptor is flush with the front panel of the
5.Tighten the mounting screws so that the adaptor is firmly attached to the
6.Repeat the procedure described above to attach the remaining adaptor to the other end of the
POWER ON
OFF
DIGITAL |
|
| |
COLOR | QUAD |
| |
SCQ- | SWITCHER | ||
| |||
| 041P |
AUTO | SWITCHER |
|
SINGLE | DISPLAY |
| |
1 | 2 |
| |
3 | 4 |
|
QUAD | DISPLAY |
|
12
34
| FREEZE | ||
1 |
| 2 | |
|
| ||
3 | CHARACTER | ||
SELECT | 4 | ||
| |||
|
| MENU |
SYSTEM | SETUP |
| |
| SETUP |
| ENTER |
ALARM RESET
LIST
10