Chapter 4
Channel Title Setting
If not in the system setup mode, press the “SETUP” button to enter the system setup mode.
When video signals are input to the 4 channels, the title of each channel can be indicated by up to 8 letters in which alphabets, digits, and special characters can be combined. Set a channel title as shown below.
Press the “MENU” button on the main menu screen to place the “ ” sign to the side of the “1 CHANNEL TITLE SET”. Then press the “ENTER” button to show the sub screen for setting a channel title as shown below.
<CHANNEL TITLE SET>
→1. CHANNEL1: ■ ■ ■CH1 ■ ■
2.CHANNEL2: ■ ■ ■CH2 ■ ■
3.CHANNEL3: ■ ■ ■CH3 ■ ■
4.CHANNEL4: ■ ■ ■CH4 ■ ■
[CHARACTER TABLE]
■ABCDEFGHIJKLMNOPQ R STUVWXYZ0123456789; / · < > .
At this point, you can enter letters on the position of the blinking cursor.
•Move the position of “ ” by pressing the “MENU” button.
•Move the position of the cursor by pressing the “SELECT” button.
•A letter to be entered on the position of the cursor can be selected by pressing the “ CHARACTER” or “CHARACTER ” button.
The letters that can be entered are shown in the Character Table above.
17
