Samsung SCQ-041P, SCQ-041AP manual ~Ac

Chapter 1

7	ALARM IN/OUT	This is the alarm control connector, which
		connects the sensor to four alarm input
		terminals and connects the output terminal
		to an external unit, such as an alarm input
		terminal of a time lapse VCR. The alarm
		reset output terminal should be connected
		to the Alarm Reset Input terminal of a
		external unit (such as time lapse VCR).
8	RS-232C	You can control the SCQ-041P remotely by
		connecting the remote control connector to
		a PC with a terminal emulation program
		using an RS-232C cable.
9	~AC IN	This is an input terminal that connects to
		AC 100V-240V power.

NOTE

The above connectors 1 to 4 are 75 automatic terminal resistance. Therefore, this unit can be used to input image signals of the other components.

7