User’s Guide
Loss Detect Setting
If not in the system setup mode, press the “SETUP” button to enter the system setup mode.
Then you can set the LOSS DETECT ON/OFF for each channel.
Press the “MENU” button on the main menu screen to place the “ ” sign to the side of the “6. LOSS DETECT SET”. Then press the “ENTER” button to show the sub screen as shown below.
<LOSS DETECT SET>
→1. CHANNEL1 : ON
2.CHANNEL2 : ON
3.CHANNEL3 : ON
4.CHANNEL4 : ON
•Move the position of “ ” by pressing the “MENU” button.
•Set “ON” or “OFF” for each channel by using the “SELECT” button. The channel with “OFF” setting, the CHANNEL LOSS DETECT will not be carried out.
After completing all the setups of LOSS DETECT SET, press the “ENTER” button to show the main menu. If you want to proceed the setup for another item, move “ ” to a desired item for the setup. When all the required setups are done, press the “SETUP” button to exit the system setup mode.
24
