Samsung SCX-4216F manual Using the Bypass Tray

NOTES:

•If you experience problems with paper feed, place the paper in the Bypass tray.

• You can load up to 150 sheets of previously printed paper. The printed side should be facing up with an uncurled edge at the top side. If you experience problems with paper feed, turn the paper around. Note that the print quality is not guaranteed.

Using the Bypass Tray

Use the Bypass tray to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper tray.

Postcards, 3.5 by 5.83 in.(index) cards and other custom-sized materials can be printed with this printer. The minimum size is 76 by 127mm(3.0 by 5.0 in.) and the maximum size is 216 by 356mm(8.5 by 14 in.)

Acceptable print materials are plain paper with sizes ranging from 100 x 148 mm (3.9 x 5.8 in.) to Legal, 216 x 356 mm (8.5 x 14 in.), the largest size acceptable, and weighing between 16 lb and 32 lb.

NOTES:

•Always load only the print materials specified in the Specifications on page B.6 to avoid paper jams and print quality problems.

•Flatten any curl on postcards, envelopes and labels before loading them into the Bypass tray.

•When you print on 76mm X 127mm (3 X 5 in.) sized media with loading into the tray, open the rear output tray.

1Load a sheet of the print material with the print side face up and into the center of the tray.

3.8 PAPER HANDLING