Samsung SCX-4623 manual Copy Setup, Change Default, Auto Report, Changing the copy setup options

OPTION	DESCRIPTION
RCV Start Code	This code allows you to initiate fax reception
	from an extension phone plugged into the EXT
	socket on the back of the machine. If you pick up
	the extension phone and hear fax tones, enter
	the code. It is preset to *9* at the factory.
Auto Reduction	When receiving a fax containing pages as long
	as or longer than the paper loaded in the paper
	tray, the machine can reduce the size of the
	original to fit the size of the paper loaded in the
	machine.
	Turn on this feature if you want to automatically
	reduce an incoming page.
	With this feature set to Off, the machine cannot
	reduce the original to fit onto one page. The
	original will be divided and printed in actual size
	on two or more pages.
Discard Size	When receiving a fax containing pages as long
	as or longer than the paper in your machine, you
	can set the machine to discard a specific length
	from the end of the received fax. The machine
	will print the received fax on one or more sheets
	of paper, minus the data that would have been
	on the specified discard segment.
	When the received fax contains pages larger
	than the paper in your machine, and Auto
	Reduction has been turned on, the machine will
	reduce the fax to fit on the existing paper, and
	nothing will be discarded.
Junk Fax Setup	This setting may not be available depending on
	your country. Using this feature, the system will
	not accept faxes sent from remote stations
	whose numbers are stored in the memory as
	junk fax numbers. This feature is useful for
	blocking any unwanted faxes.
	When you turn on this feature, you can access
	the following options to set junk fax numbers.
	• Add: Allows you to set up to 10 fax numbers.
	• Delete: Allows you to delete the desired junk
	fax number. If you select Delete All, Allows
	you to delete all junk fax numbers.
DRPD Mode	This mode enables a user to use a single
	telephone line to answer several different
	telephone numbers. In this menu, you can set
	the machine to recognize which ring patterns to
	answer. For details about this feature, see
	"Receiving faxes using DRPD mode" on
	page 73.

Change Default

OPTION	DESCRIPTION
Resolution	Changing the resolution setting affects the
	appearance of the received document.
	• Standard: Originals with normal sized
	characters.
	• Fine: Originals containing small characters
	or thin lines or originals printed using a
	dot-matrix printer.
	• Super Fine: Originals containing extremely
	fine detail. Super Fine mode is enabled only
	if the machine with which you are
	communicating also supports the Super
	Fine resolution.
	• For memory transmission, Super
	Fine mode is not available. The
	resolution setting is automatically
	changed to Fine.
	• When your machine is set to Super
	Fine resolution and the fax
	machine with which you are
	communicating does not support
	Super Fine resolution, the machine
	transmits using the highest
	resolution mode supported by the
	other fax machine.
	• Photo Fax: Originals containing shades of
	gray or photographs.
	• Color Fax: Originals with colors. Sending a
	color fax is enabled only if the machine with
	which you are communicating supports color
	fax reception and you send the fax manually.
	In this mode, memory transmission is not
	available.
Darkness	You can select the default contrast mode to fax
	your originals lighter or darker.

Auto Report

You can set the machine to print a report with detailed information about the previous 50 communication operations, including time and dates.

For further details, see "Printing sent fax report automatically" on page 76.

COPY SETUP

Changing the copy setup options

For copy output, you can set up several options in advance.

1.Press Copy on the control panel.

2.Press Menu on the control panel.

3.Press the left/right arrow until Copy Setup appears and press OK.

4.Press the left/right arrow until the copy setup item you want appears and press OK.

5.Press the left/right arrow until the setup option you want appears and press OK.

6.Press the left/right arrow until the setting you want appears and press OK.

Machine status and advanced feature_ 78