Samsung SHR-4080P/SAU manual 1System Motion

SHR-4080P USER’S MANUAL

1System Motion

●Turn the power on and the following LOGO screen pops up.

●After the LOGO screen appears, the button in front of SHR-4080P blinks 6 times to initialize the system for operation.

●Upon completion of normal initialization, the Live screen appears accompanying a beep sound.

●It requires 30 to 40 seconds until the Live screen appears.

Note

A new HDD may require more time for the initialization until the Live screen appears due to the initialization period of the new HDD.

If the Live screen does not appear at all or the button in front of SHR-4080P repeats blinking, please check the connection across the product body. If you find any error, please ask the shop where you bought the product.

●The Live screen does not affect the earlier MENU setup. If you reboot the system after power-off during recording, the Live screen will appear, accompanying recording.

Note

If you see no more Live screen, you shall check if video data comes out in Composite mode or VGA mode.

If you whish to change the video output mode, you shall hold on to the MODE but- ton in front of SHR-4080P and keep pressing the 0 button for 5 seconds. Then, the front button will repeat on and off.

4-1