7Backup
●Sel Tap is not checked in the beginning.
Once checked, Sel Tap activates “Start” and free space is displayed in the Free Space zone.
●Set the date and time that you want to back up and press “Start” to start Backup. When you change Start Date/Time or End Date/Time, free space keeps updated in the Free Space zone.
●Set to First On, Backup is set to the date of the initial data and the time is inactivated.
●Set to First Off, Backup cancels Dim so that you can set a date on your own.
●Set to Last On, Backup is set to the date of the initial data and the time becomes dim.
●Set to Last Off, Backup cancels Dim so that you can set a date on your own.
●Without Backup Device, Warning sign pops up.
Select and connect Backup Device in
●With more than 2 Backup Devices connected, Warning sign pops up. More than one Backup Device is prohibited in Backup process.
Backup setup is allowed for either SCSI or IEEE1394 of
●Press “Stop” to stop Backup.
●Pressing Cancel during the Backup returns to the upper menu but this does not affect Backup process.
Note
[Backup Device]
Without Backup Device or with more than one Backup Device, Backup does not start. Check if only Backup Device is connected before you proceed with Backup.
Caution
[In Backup Process]
Pressing Cancel returns to the upper menu but this does not affect Backup process. Press Stop to suspend Backup. Backup may possibly slow the speed of the set.
