Samsung SHR-4080P/SAU manual 8Network

SHR-4080P USER’S MANUAL

8Network

Netwrok

Connection Mode	Static IP
Bandwidth	2 Mbps
Admin Password	*************
User Password	*************
IP(Port)	192.168.001.201(554.555.556.557)
Gateway	192.168.001.001
Subnet Mask	255.255.255.000
DNS	168.126.063.001
ADSL User ID	ID
Password	*************

●Connection Mode

Designates the kind of the network connected to the main body of SHR-4080P. Static IP : When the main body is connected to the network with Static IP. Dynamic IP : When the main body is connected to the network with Dynamic IP

supplied by DHCP.

ADSL(PPPoE) : When the main body is connected to the ADSL network with PPPoE.

●Bandwidth

Designates the network speed to which the main body of SHR-4080P is connected. Unlimited / 2 Mbps / 1 Mbps / 600 Kbps / 300 Kbps

Caution

When the main body is connected to the network using high speed LAN, set to 1 Mbps or 2 Mbps. When the main body is connected to the network supporting low bandwidth such as ADSL, set below 600 Kbps. If you set Bandwidth high though the main body is connected to a slow network, the network load will get heavy therefore the connection with Smart Viewer or video monitoring may be instable.

●Admin Password

The password for the connection between Smart Viewer and the set with the authority of Admin. The password can be as long as 8 digits.

Press "Enter" and the left number keys from 0 to 9 for setup.

●User Password

The password for Smart Viewer’s access to the set with the authority of general user.

●IP (Port)

So sets up the IP Address and Port number as to connect the main body of SHR-4080P with the network. If the Connection Mode is set to Static IP, you shall type in IP yourself. If the connection mode is Dynamic IP or ADSL(PPPoE), the IP allocated by the DHCP server or ADSL company will be automatically displayed. In case of failure of DHCP or ADSL connection, 000.000.000.000 will be displayed. Then, press OK to retry connec- tion to get a new IP. If you continue to fail in DHCP or ADSL connection, keep the main body of SHR-4080P off for a while and turn it on for retry. The Port number indicates the 4 ports by which the main body attempts network connection. The default is 554, 555, 556, 557. You may change the Port number under circumstances. The Port number will be altered in group of 4 consecutive numbers. If you allocate different Port numbers to each main body and IP Router while you use IP Router to connect multi SHR-4080Ps, you can compose a network through port forwarding.

5-27