Samsung SHR-4080P/SAU manual Disk Mode Setup, Disk End Mode, Disk End Beep

SHR-4080P USER’S MANUAL

2.Hot Plug - Connect/Disconnect

You may connect or disconnect IEEE1394 Hard Disk while power is supplied to the SHR-4080P main body.

①As for connecting, connect IEEE1394 Hard Disk with the SHR-4080P main body and press “Connect”. Pressing “Connect” makes the SHR-4080P main body recognize all connected IEEE1394 Hard Disks.

➁As for disconnecting, be sure to press “Disconnect” and detach IEEE1394 Hard Disk from the SHR-4080P main body safely.(Be sure to pause recording or backup process.) Pressing “Disconnect” cancels and detaches all connected IEEE1394 Hard Disk.

Caution

[ IEEE-1394 Hot-Plug Connect/Disconnect Function ]

You may connect or disconnect SCSI while power is supplied to the SHR-4080P main body. Only IEEE1394 supports the Hot-Plug function.

[Backup HDD]

SCSI and IEEE1394 cannot be used as Backup HDD simultaneously. IEEE1394 shall be set to External to use SCSI as Backup.

SCSI shall be set to External to use IEEE1394 as Backup.

Disk Mode Setup

●Disk End Mode

Stop : Stops recording when HDD is full during recording.

Overwrite : Deletes the original data and save a new data when HDD is full during recording.

Please delete the HDD data to change the initial mode.

☛To delete data, please refer to the following menu. 5-7. System Information and Setup

●Disk End Beep

On : Beeps when HDD is full during recording.

Off : When HDD is full, the beep sound is not heard.

5-9