●Gateway
Determines Gateway Address in the SHR-4080P main body.
●Subnet Mask
Determines Subnet Mask Address in the SHR-4080P main body.
●DNS
Sets up DNS Address in the main body of SHR-4080P. The default of DNS is 168.126.63.1. Generally, you don’t have to alter the DNS default but you may be hard to connect to the network sometimes if you use DHCP or ADSL. In this case, call the net- work manager or ADSL company to set up a new DNS address.
●ADSL User ID
If the main body of SHR-4080P is connected with the ADSL(PPPoE) network, input User ID subscribed to the ADSL company. You may input User ID with a Virtual key- board as long as 40 digits irrespective of alphabets, numbers, or symbols.
●Password
If the main body of SHR-4080P is connected to the ADSL(PPPoE) network, input the user password subscribed to the ADSL company. You may input the password with a Virtual keyboard as long as 40 digits irrespective of alphabets, numbers, or symbols.
Caution
Be sure to set up IP/Port/SubnetMask/Gateway/DNS to let Smart Viewer connect with the main body of SHR-4080P.
Wrong IP/Port/Gateway/SubnetMask/DNS may prevent Smart Viewer from being connected to the main body of SHR-4080P.
Please call the network manager or ADSL company to get each setting value.
Note
If you want to connect IP Router with the main body of SHR-4080P, you shall designate a port for SHR-4080P in the IP Router setup menu.
The main body of SHR-4080P uses 4 ports for TCP communication.
In addition, if you want to use the DHCP function backed by IP Router to allocate Dynamic IP to the main body of SHR-4080P, you shall designate a port for the IP which SHR-4080P has been allocated by the IP Router setup menu.
If you use IP Router, you are recommended to rather determine IP and Port numbers to be allocated to the main body of SHR-4080P from the IP Router setup menu, set the connection mode to Static IP for the main body of SHR-4080P, and input the deter- mined IP and Port number in IP Router than use the DHCP function.
Please refer to the IP Router User’s Manual or call the manufacturer to set up IP Router.
Caution
If you set the main body network bandwidth to 300Kbps and enter the ADSL mode by Viewer, only 4CH monitoring and 1CH search are available but Audio is not.
