Inside
OVERVIEW ●
Item | Description | |
|
| |
| Consists of two different ports: | |
Alarm I/O Port | - ALARM IN : Used to receive the alarm input signal. | |
- ALARM OUT : Used to output the alarm output signal. | ||
| ||
| - GND : Used for | |
|
| |
| Restores all camera settings to the factory default. Press and hold it for | |
| about 3 seconds to turn off the system indicator and restart the system. | |
Reset Button | J After resetting the camera, you must run the IP Installer program to | |
| change the basic network settings such as IP address, Subnet mask, | |
| Gateway, etc., before you can connect to the network. | |
|
|