setup screen
J The current time can vary depending on the computers regional (GMT and DST) and country (PC time configuration) settings.
To check the log information
Select <System> - <Log>.
The Log information list appears.
System log list : Shows the log information about the system changes along with time and IP address.
-User login : Shows the current login user to the camera.
-Video confi guration change : Show video setting changes.
-System time change : Shows the time changes.
-System started : Shows time when the camera is turned on.
M | The maximum of 2000 logs can be recorded. |
| If the log number is over 2000, the log in the bottom of the log list will be replaced with a new log. |
To update the software
Select <System> - <Software update>.
The Software update window appears.
How to update the software
1.From the software update window, click [Browse…].
The Open dialog appears.
2.Select an updatable fi le and click [Open].
3.From the software update window, click [Install].
The selected fi le will be unzipped with a start of the update.
It may take a several minutes to complete the update.