Samsung SNC-B5368P CONNECTING THE CAMERA DIRECTLY TO A DHCP- BASED XDSL/CABLE MODEM, Setting the IP Router, English _31, Subnet Mask:, Subnet Mask:, Default Gateway:

ex2) If the address (LAN IP) of the IP router is 192.168.0.1 IP address: 192.168.0.100

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1

ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1 IP address: 192.168.xxx.100

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.xxx.1

M For the address of the IP router, refer to the product’s documentation.

CONNECTING THE CAMERA DIRECTLY TO A DHCP- BASED XDSL/CABLE MODEM

		INTERNET
	￿￿￿￿￿
	xDSL or
	￿￿￿￿￿￿	External Remote PC
SNC-B5368	Cable Modem

DDNS￿￿￿￿￿Server

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

(Data Center, KOREA)

Setting the IP Router

This is enabled for a modem using DHCP.

1.Set the Static or Dynamic IP address. (pages 34~39)

2.Launch an Internet browser on the local PC connected to the IP Router.

3.Enter the IP Router’s address in the address bar of the browser. ex) http://192.168.1.1, http://192.168.0.1

or http://192.168.xxx.1

For the DDNS URL address, refer to "To check the DDNS address". (page 41)

4.When the IP Router is connected, the login window appears and prompts you to enter the password.

For the login IP and the password, refer to the IP router’s documentation.

5.When done, you will see the setup window of the IP router. In the setup menu, select “Automatic Configuration-DHCP” for Internet Connection Type.

For the menu location of Internet Connection Type or DHCP selection, refer to the IP router’s documentation.

6.When done, click the [Save] or [Apply] button to save the settings.

SETUP AND CONNECTION NETWORK ●

English _31