Samsung SNC-B5368P manual To set an alarm image

To set an alarm image

You can set to transfer the alarm image to the FTP/SMTP server.

Select a transfer method when an event occurs or the schedule transfer function is activated.

1.Select <Event> - <Alarm image>. The Alarm Image setup window appears.

y Transfer mode : Select an alarm image transfer mode from FTP transfer and E-mail transfer.

-FTP transfer : The image is sent to the specifi ed FTP address.

-E-mail transfer : The image is sent to the specifi ed email address.

yTransferred image naming setup : You can set the fi le name of an alarm image to be sent when an alarm is triggered or during the scheduled transfer.

yPre/post alarm image : You can set to save the pre or post alarm image.

-Number of image : The frame rate per second can be one among 1, 2, 3, and 5.

-Pre-alarm duration : The pre alarm duration can be one among 5 seconds, 10 seconds, 15 seconds, and 30 seconds. You can send a pre-alarm image of up to 30 seconds before the alarm is triggered.

(The max time differs, depending on the frame rate)

-Post-alarm duration : The post alarm duration can be one among 5 seconds, 10 seconds, 15 seconds, and 30 seconds. You can send a post-alarm image of up to 30 seconds after the alarm is triggered.

(The max time differs, depending on the frame rate)

M The pre/post alarm duration is not available in SMTP transfer mode. Only one image at the corresponding time will be transferred.

2.When done, click [Apply]. Your settings will be saved.

● SETUP SCREEN

English _57