Samsung SNC-B5368P manual Camera Setup, Camera ID, Iris, Backlight Select either BLC or WDR

camera setup

CAMERA SETUP

You can configure the general settings of the camera module.

Use the four direction (▲▼◄ ►) buttons to select a desired item.

CAMERA ID

Provide the ID and position for a camera that displays on the screen.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)

1.Select <CAMERA SET> - <CAMERA ID>.

2.Use the four direction (▲▼◄ ►) buttons to select a desired character.

In the lower input box of the screen, the selected character will be entered.

You can enter up to 54 characters including alphabets, numbers and special characters.

CAMERA ID

ABCDEFGHIJKLMNOPQRSTUVWXYZO 123456789 : ?_+*()/

SP►► ◄◄SP LOCATION

- - - - - - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - -

3. When done, continue to select <LOCATION> to specify the display position of the camera ID.

IRIS

You can set the iris to control the intensity of radiation incoming to the camera.

For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)

1.	Select <CAMERA SET> - <IRIS>.
2.	Use the left/right (◄ ►) buttons to select <ALC>.		ALC
	y LEVEL : Select an overall brightness level.	LEVEL		[ 00] ---- I ----
		BACKLIGHT			OFF

yBACKLIGHT : Select either <BLC> or <WDR>.

-WDR : Specify the synthesis level in the WEIGHT, and shutter speed in the WDR LEVEL, or select <OUTDOOR> or <INDOOR> in the WHITE BAL.

-BLC : Set the <BLC> area by specifying the <SIZE> and <POSITION>.

M If the iris is set to <ALC>, fixing the iris is your priority when you adjust AE and the shutter speed.

22_ camera setup