Sanyo CHDX07263, CHDXR09663 Remote Controller Servicing Functions, List of Servicing Functions

3. Remote Controller Servicing Functions

W-2WAY ECO-i SYSTEM Remote Controller Functions

•The remote controller includes a number of servicing functions. Use these as needed for test runs and inspections.

List of Servicing Functions

Functions	Description		Button operation		Reset operation	Unit status
	Operation with	Press and hold the		button
Test run	forced thermostat
		for 4 seconds or longer.
	ON
Sensor	Temperature	Press and hold the		and
temperature	display from each		buttons for 4 seconds or			Current operation is
display	sensor	longer.				maintained.
Servicing check	Alarm history	Press and hold the		and
			buttons for 4 seconds or
display	display				Press the
		longer.
					button.
	Filter life time,
		Press and hold the		and
	operating mode
Simple settings	priority, central		buttons for 4 seconds or			When settings are made
	control address,
		longer.				from a remote controller,
	and other settings
						the indoor unit where that
	System address,
		Press and hold the		,		remote controller is
	indoor unit address,
						connected stops.
Detailed settings	central control	and	buttons for 4 seconds
	address, and other
		or longer.
	settings
	Automatic address	Press and hold the		and
Automatic	setting based on
	command from	the timer operation		buttons	Automatic reset
address
	the wired remote
		for 4 seconds or longer.
	controller					Entire system stops.
	Change of indoor	Press and hold the		and	Press the
Address change		the timer operation		buttons
	unit address				button.
		for 4 seconds or longer.

4

4 - 15