(5)Insulation testing

Before testing indoor wiring insulation, shut down the UPS and disconnect the input and output cables. Conducting an insulation test with the UPS connected may damage electronic components such as the built-in arrester.

(6)Rack support rails (not supplied) are required to mount the UPS on a rack. For details, contact your supplier or Sanyo Denki representative.

2.4Dealing with Errors

Contact your supplier or Sanyo Denki representative if any of the following occur.

(1)The red ALARM indicator lights (except when the UPS stops because of a prolonged power outage).

(2)The green INV.ON/STAND BY indicator, green INPUT indicator, or green OUTPUT indicator does not light even when the UPS is operated properly.

(3)Another condition occurs which you suspect is caused by a failure in the UPS.

3.Checking the Contents of the Package

After opening the package carton, check to be sure that it contains all of the following items. If any item is missing, contact your supplier or Sanyo Denki representative.

(1) UPS

1

(2) Accessories Instruction Manual (this manual)

1

Fuse 15 A

1

Network cable

1

Rack mounting bracket (Right)

1

Rack mounting bracket (Left)

1

Screws for Rack mounting brackets

4

Bushings

6

Stands

2

Screws for Stands

4

Power Management Software disc (CD-ROM)

1

(SANUPS SOFTWARE STANDALONE)

 

including Install Guide and User guide

 

* Note about sale or transfer of ownership

If you sell the UPS or transfer ownership to a third party, all accessories and other items supplied with the UPS must be sold or transferred together with the UPS.

− 7 −