6.6Mounting a Rack Mount Type UPS

・Be careful to avoid straining your lower back when moving and installing the UPS.

・The UPS weighs about 16 kg (35.27 lbs). Always get at least one other person to help you install it. Bodily injury can result if the UPS falls.

・The UPS can fall when it is moved or installed, resulting in bodily injury or

CAUTION

damage to the UPS. Hold the bottom side of the UPS firmly with both hands when

installing it.

・For safety, use L-type rails (support rails) when mounting the UPS in a rack. (Contact the manufacturer of your rack for more information about L-type rails.)

The UPS is designed for mounting in 19-inch racks only. Refer to §6.3 “Installation Space” and make sure you secure enough ventilation space in front of and behind the UPS. Do not place other objects on top of the UPS. Doing so can damage the UPS.

The UPS is heavy, weighing about 16 kg (35.27 lbs). Installation at the very bottom of the rack is recommended. Always use L-type rails (support rails) when mounting the UPS in a rack. (Contact the manufacturer of your rack for more information about L-type rails.)

①Attach the supplied rack mounting brackets to the UPS.

There are 2 brackets, 1 for the left and 1 for the right. Refer to the following illustration and make sure you attach them in the correct direction.

②Mount the UPS in the rack.

①Attach the left and right rack mounting brackets so that the large and small holes are on the bottom.

6.7 Inserting the Bushings

When you are not using the stand or rack mounting brackets, insert the supplied bushings into the holes on the UPS.

Left side: 4 locations

Right side: 2 locations

 

− 15 −