10.2 Setup Menu OperationsSet all menu items with the following procedure.This example shows how to set the “UPS operation mode” item to “Economy”.① With MAIN SW on the back panel set to “ON”, check that the green INV.ON/STANDBY indicator and the green OUTPUT indicators are not blinking.②Press and hold it for at least 3 seconds.

Buzzer : 2 beeps

2 LEDs blink.

Hold for 3 seconds.

③ Select the menu item to set by using the 5 LEDs surrounded byin the following
figure.Press and quickly release (within 3 seconds) so that a menu item selection LED

blinks. Each press makes a different LED or set of LEDs blink. Keep pressing until you have selected the menu item you want to set.

Example

LEDs that blink when the “UPS operation mode”

 

menu item is selected

Short press

Menu item

Blinking LEDs

UPS operation mode

● ○ ○ ○ ○

See the list in the previous section for the LED patterns to select other menu items.

④Select the value to set by using the 4 LEDs surrounded by in the following figure.

Press and quickly release (within 3 seconds) so that a setting value LED blinks.

Each press makes a different LED or set of LEDs blink. Keep pressing until you have selected the value you want to set.

Example

LEDs that blink when the “Economy” setting is

selected.

 

 

 

 

Setting

Blinking LEDs

 

Auto

● ○ ○ ○

 

Double Conversion

○ ● ○ ○

Short press

Economy

● ● ○ ○

See the list in the

previous section for the LED

setting patterns of other menu items.

⑤ When you are finished making settings, press and hold it for at least 3 seconds.

Two beeps sound from the buzzer. The setting is saved and the UPS returns to normal operation.

Hold for 3 seconds.

Note

If you keep pressing for 3 more seconds, 2 beeps will sound again and all settings will return to the factory defaults. However, at Model 'E11A102U001-10' and 'E11A102U001-15', “② Output voltage” setting will return to 100V, not defult.

− 24 −