Adjusting the Alert Volume

You can set the alert volume separately from the ringer
volume setting.
1. Press >Settings > Sounds > Volume >
Advanced....
2. Select Alarms,Text Message,Picture Mail,Voicemail,or
VoiceSMS.
3. Using the navigation key, select Separate Vol.
4. Press the navigation key right orleft to choose a
volume level and press Done(left softkey).
Alert Notification
Set yourphone to alert you with an audible tone when
you change service areas, a call has been connected,
there are messages, oryournetwork signal is fading as
well as once a minute during a voice call.
1. Press >Settings> Sounds > Alerts.
2. Select Beep Each Minute,Out of Service,Connect,
Signal Fade/Call Drop,orMessaging.
nIf you select Messaging,select Text Message,
Picture Mail,Voicemail,orVoiceSMS.
3. Use yournavigation key to select a settingand
press .
Silence All
The Silence All option allows you to mute all sounds
without turning yourphone off.
Toactivate Silence All:
©
With the phone open, press the volume key down
repeatedly in standby mode. (The screen will display
“Silence All.”)
Todeactivate Silence All:
©With the phone open, press the volume keyup
repeatedly to select a volume level.
Tip You can make the ringervibrate at any volume level
by checking Always Vibrate.

Section 2B. Settings 35

Settings