Sanyo MDF-C8V service manual Components List, The continuation of the table

COMPONENTS LIST

The continuation of the table 1

No.	PARTS NAME	Q’ TY	APPEARANCE		THE EXPLANATION OF THE USE
9	LABEL	1		It is put near the connection place.
10	DOOR SWITCH	1		This assy connected a door switch and
	ASS’Y			two indicator lamps (green and orange).
	INDICATOR			It is the lamp turned on with a power
10-1		-		switch of the back-up system. 䋨 It is
	LAMP (GREEN)
				attached.䋩
	INDICATOR			It is the lamp turned on when the battery
10-2		-		of	the backup system declines. 䋨 It is
	LAMP (ORANGE)
				attached.䋩
				When the door of the freezer opens and
10-3	DOOR SWITCH	-		closes, it is the switch which does on-off.
				䋨It is attached.䋩
10-4	WIRING ASS’Y	1	Refer to the Fig. of Page12.	These wires are the indicator lamp and
	DS			the door switch. 䋨It is attached.䋩
11	DOOR SWITCH	1		It is a plate which fixes a door switch
	MTG PLATE			ass’y.
	SHIM (for DOOR			It is a plate to lay under the door switch
12	SWITCH MTG	1
				mounting plate.
	PLATE)
				It is fixed on the door of the freezer, and it
13	STRIKE PLATE	1		is the part that on-off does a door switch
				by the open/close of the door..
14	WIRE COVER	2		This cover fixes the wiring ass’y DS of the
				door switch ass’y.
	SCREW A M4䌸10			For nylon clip 6N䋨1䋩䇮For Nylon clip 7N
15		11		䋨2䋩䇮For back-up system䋨2䋩䇮For solenoid
	(C TIGHT)
				valve䋨4䋩䇮For mounting plate䋨2䋩
	SCREW B M4䌸10			For solenoid cover䋨4䋩䇮For door switch ass’y
16	(STAINLESS)(CO	7
				䋨3䋩
	LORED HEAD)
17	SCREW C M4䌸10	2		For valve cover
	(STAINLESS)
18	SCREW D M5䌸10	2		For strike plate
	(STAINLESS)
19	SCREW E M5䌸16	2		For door switch mounting plate
	(PAN HEAD)

79

6