Chapter 2 Installation
Flow of installation
The following are instructions for attaching this product to the projector and connecting it to the network. Please review the entire procedure to become familiar with it.
1Function of the network unit (☞ p.17)
Explains the name and functions of each part of the network unit.
2Installation and network configuration (☞ p.18-24)
1 Mount this product onto the projector.
2 Connect the LAN cable and join it to the network. 3 Configure the network of the network unit.
4 Set the Network PIN code.
Set up is complete
The preparation is completed to control the projector connected to the network. At next step, set up and control the projector via the network by using the web browser installed on your computer. Please see chapter 3 "Basic setting and operation". (☞ p.25)
For the installing the camera and PJ Camera Viewer and operating instructions, refer to the separated owner's manual of PJ Camera Viewer.
16