Sanyo POA-PN02C Notes on timer setting

55

PJ-NET ORGANIZER

OWNER'S MANUAL [PLV-80/75 Series]

ENGLISH

✐ The timer operates by using the clock function provided in this product. Before setting the timer,

please confirm that the current date and time are set correctly. Timer and clock functions are

functioning using a lithium battery provided in this product. When the bat tery runs down, the

clock and timer functions will not operate correctly. Consult your local dealer for the replacement

of battery. The replacement must be carried out by a qualified service perso nnel.

Notes on timer setting

✐ Up to 10 timer events can be registered. Timer events always operate according to the next valid

event depending on the projector's power status. In the example below, event 3 turns on the

projector so next event 4 (also turning on projector) will not be effective be cause the projector

is already turned on. Similarly, when the projector is turned off by event 5, event 6 OFF will not

be effective in turning it off again. But these secondar y events (event 4 and event 6) will become

effective if a person turns off the projector (af ter event 3 and before event 4) or turns on the pro-

jector (after event 5 and before event 6).

Event 1 ON

Event 2

OFF

Event 3

ON

Event 4

ON

Event 5

OFF

Event 6

OFF

Projector Power ON

OFF OFF OFF

ON

Invalid event Invalid event

Time

✐ When the timer events are set at the same time, the last event set will override the previous

events. For example, if there is an event like "ON at 8:00 everyday" and then new event is set like

"OFF at 8:00 everyday", only the last setting event is effective.

✐ When the timer event ON occurs during cooling down period, this is invalid event because the

projector cannot be turned on during this cooling down period.

Timer setting

Contents

Main Compliance Federal Communication Commission Notice CAUTION CAUTION ON USE IN NETWORk Contents Page Page Page Features E-Mail Alert function (+p.34) Web Management function (+p.25) PJ Camera Viewer func- tion (refer to the separated booklet) SNMP Agent function (+p.38) Multi-control func- tion (+p.58) Automatic On/Off using Clock function (+p.53) SNMP Manager function (refer to the separated booklet) Control port ready for external equipment (+p.63) Standard mode Operating environment of PJ-Net Organizer The limitation*1 of connection between this product and hub or computer Before use Package contains Page Notice Expression/Abbreviation Use of this manual Trademarks Page Page Function of the network unit (+ p.17) Installation and network configuration (+ p.18-24) Set up is complete 1 2 3 4 Flow of installation [1] Name and function of each part Mounting [2] Installation and network configuration 1 2 3 Connection of LAN cable 1 2 port on the network unit. 3 1 Network configuration Confirmation of the network menu Configure the network 2 How to enter the numbers 3 Completing of installation Network PIN code setting 1 2 3 Page Notice about system construction Page Login the setting page of the projector 1 2 3 z Main setting page in the Standard Mode display control description. x Main setting page in the Light Mode display How to use the setting page Type of the setting pallet Text box setting Pull-down menu setting Radio button setting Check box setting Initial setting Network PIN code setting PJLink and password setting What's PJLink? Date and time setting Network configuration E-mail setting 1 2 3 Examples: Type and contents of alert mail When internal PJ temperature is too high: When internal PJ power circuit is failed: When PJ lamp replacement time is reached: When lamp corres. value reaches preselect use time: SNMP setting Page Trap option setting Tick check boxes in front of the condition item to send the trap. Page Power control and status check About projector condition Controls Input System Available selection at the RGB(PC analog) input Available selection at the RGB(PC digital) input Available selection at the Video/S-video/Scart input Available selection at the RGB(AV HDCP) input Image adjustment Input source Sound Menu PC adjustment Setting up the projector Page Save the controls and settings Store/free the settings 1 2 3 Page How to set the timer 1 Timer setting 2 3 4 Change the event mode Check the timer events Notes on timer setting Projector information Indication of the lamp status Multi-control Start/stop the multi control Register the projector Confirmation of registered projector Status Change the mode of the registered projector Check & Change page in the light mode Controlling all together Setting all together Page Serial port setting Setting examples for the serial control Example 2 Controlling a projector not provided with the network function through network. Control examples Example 1 Controlling AV equipment through network. Example 3 Controlling the projector with the serial controller through the serial port. Serial controller PJ2 PJ1PJ3 Use of telnet Preparation 1 2 3 4 3 4 Control the projector with telnet Page Chapter 6 Appendix Examples of connection Peer-To-Peer connection To another network Connecting the projector (PJ01) to the control computer (PC05) directly. * UTP cross cable The gateway (Router) installed in the network Examples of connection Connecting the projector (PJ01) to the control computer (PC05) via the gateway. Oce Gateway (Router) Web browser setting Active Script/JavaScript enable Flash Player enable Proxy setting Examples: OS/Browsers Windows XP Professional Internet Explorer v.6.0 ActiveScript setting Flash Player enable Proxy setting Netscape Navigator v.7.0 JavaScript Setting Flash Player enable Proxy setting Product specification LAN port specification Port specification 8-pin modular connector (RJ-45) Serial port specification Mini DIN-8pin connector Q&A Installation/Access Q A Q A Q A Q from a remote location? A Q Page Page Page Page Q A