Chapter 4 Controlling the Projector
PC adjustment
Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen.
Up to 60 characters can be used for the Memo of ExMode11 to ExMode50.
Item | Description |
|
|
Current mode | Displays a current mode like VGA, SVGA, XGA. SXGA, |
| UXGA, WXGA, etc. or MODE1 - MODE10, EXT11 - |
| EXT50 which are the customized mode created by |
| using the "Mode Store" function described below. |
| EXT51 - EXT60 represents mode Totalsave1 - |
| Totalsave10 used in the item "Save" (+p.51). |
Auto PC adj | Performs automatic adjustment. |
Fine sync | Performs Fine Sync adjustment. (0 ~ 31) |
Total dots | Adjust the number of total dots in the horizontal |
Clamp | period. |
Adjusts the phase of the clamp. (1 ~ 255) | |
Display area |
|
Horizontal | Adjusts the image area horizontally. |
Vertical | Adjusts the image area vertically. |
Item | Description |
Position |
|
Horizontal | Adjusts the horizontal position of the screen. |
Vertical | Adjusts the vertical position of the screen. |
Reset | Resets the PC adjustments to the previous levels. |
Mode Store | Stores the PC adjustment values. Select a mode |
| no. [Mode1 - Mode10, ExMode11 - ExMode50] |
Mode Free | from the |
Clear the PC adjustment values. Select a mode | |
| no. [Mode1 - Mode10, ExMode11 - ExMode50] |
| from the |
48
✐The PC adjustment settings can be stored up to 50 sets, 10 sets for Mode1 to Mode10 are stored into the projector and 40 sets for ExMode11 to ExMode50 are stored into the network unit.
