Chapter 4 Controlling the Projector
Register the projector
To use the multi control function, register the IP address of the projector you intend to con- trol. Click PJ registration sub menu tab and set the IP address and Memo, then click Set button.
Items | Description |
|
|
IP address | Enter IP address of the projector to control |
Memo | Enter projector name or installed location etc. |
Confirmation of registered projector
To check the registered information, click Check& Change sub menu tab. The registered information of the projector is listed as the below.
*The word "None" is displayed if not using the "Memo" func- tion.
*When you click on a listed IP address, the login page for the selected projector will be dis- played with a new window.
IP address
Status
Memo
Page no.
Click here to close the sub menu Check & Change.
60
✐ 10 projectors per page can be registered and up to 100 sets can be registered for the multi- control.
