Sanyo POA-PN02C owner manual How to enter the numbers with the screen 10-key pallet

Installation and network configuration

How to enter the numbers with the screen 10-key pallet

1 Select a column with a red frame by using the point buttons 7 8 .

2 Press SELECT button. The screen 10-key pallet appears on the screen.

3 By using the point buttons (d e 7 8), select numbers 0 to 9 and press SELECT button. By repeating the above to enter the complete number on the column.

*To change the number in a column, select “C” and press SELECT button to clear the number in the column and then enter the number again.

4 After entering the number in the column, select a move key (7 8 e d) located on the lower part of the pallet by using the point buttons and press SELECT button repeatedly to move the red frame.

5 Repeat steps 3 to 4 for entering all the network address.

6 After finishing, select "Exit" and press SELECT button. The 10-key pallet disappears on the screen.

10-key pallet

Exit

ENGLISH

PJ-NET ORGANIZER OWNER'S MANUAL [PLV-80/75 Series]

23