Lamp Corres. Value Reset, Execute button | Sanyo POA-PN02C manual

Chapter 4 Controlling the Projector

Item	Description
Logo	Sets on or off the logo display on the screen dur-
Background	ing the startup. (Default, User, OFF)
Background	Sets screen background to blue when no signal
Display	input. (Blue, User, Black(OFF))
Display	Switches on or off the on-screen menu display on
Freeze	the screen. (ON, OFF, CountdownOff )
Freeze	Sets the image to freeze mode. (ON, OFF)
Power
management	Sets into the selected power management mode
	(OFF, Ready, Shutdown) if the input signal is
	interrupted and no control key is pressed for the
	specified period of time.
On start	*The specified time can be set 1 to 30 min.
On start	Sets the power-on mode when connecting the
	AC cord to the outlet. (ON, OFF)

Item Description

Lamp control*....Selects lamp control mode. (Normal, Eco, Auto)

This function may be disabled depending on the projectors.

Lamp

Corres. Value(h) Displays the lamp use time (Corresponding value) . Reset the time after lamp replacement.

Lamp Corres. Value Reset

1. Select a Lamp-1 radio button and then click Reset button.

2. Click OK button to execute the reset.

Item	Description

Remote control
ID	Sets the remote control ID. (Code 1 - Code 8)
Fan speed control	Sets the fan control speed. (Normal, Max)
Status	Indicates the current fan mode.
Factory default	Sets all of the projector control items to the fac-
	tory default setting except the following items.
	Lamp Corres. Value, PJ time, Network PIN code,
	Network setting
	* This function is not effective for the settings
	of the network unit, Network address settings,
	e-mail settings, etc.
PJ lock suspend	When the projector has a security of PIN code
	lock, disable this function temporarily by pressing
	Execute button.

Setting procedure

1.Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.

2.Access this page with the web browser,

3.Click Execute button on the PJ lock suspend.

* This function is disabled after the projector turns on.

50

Image 50

Sanyo POA-PN02C owner manual Lamp Corres. Value Reset, Execute button, Setting procedure

Contents

POA-PN02C PJ-Net Organizer plus C PLV-80/75 Series Model Numbers POA-PN02C Trade Name Sanyo Responsible party ComplianceFederal Communication Commission Notice Address English Contents Contents Use of Serial PortPage Chapter Features Web Management function +p.25 Multi-control func Tion +p.58 Tion Operating environment of PJ-Net Organizer PDA restriction Before use Package contains Camera mounting tool set Hook and loop fastener big Safety ropePJ Camera Viewer software Hook and loop fastener small Trademarks Expression/AbbreviationUse of this manual Preparation Chapter Installation Set up is complete Flow of installationInstallation and network configuration p.18-24 Function of the network unit p.17 Name and function of each part Connector cover Screw cover Installation and network configurationTighten two screws by using a coin etc Mounting Connection of LAN cable Default network configuration is set as follows Network configurationConfigure the network Confirmation of the network menu Fixing the network configuration Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Completing of installation Entering the Network PIN code Network PIN code settingDisplaying Network PIN code menu Fixing the Network PIN code How to enter the numbers with the screen 10-key pallet Installation Chapter Basic Setting and Operation Tion p.20. The default IP address is Login the setting page of the projectorSelect a display mode and login Enter the IP address Display of main setting Main setting page in the Standard Mode display Example of the Setting How to use the settingMain setting page in the Light Mode display Pull-down menu setting Type of the setting palletText box setting Radio button setting Initial setting Use of Battery Whats PJLink? PJLink and password settingTo 32 alphanumeric characters can be used for the password Manual setting Date and time settingAuto setting Mum Network configurationWhen using the e-mail function Menu and follow the below steps Mail settingSetting Smtp server and administrator address Tor Length of message should be less than 256 characters Registering and deleting E-mail addressesOption selection for sending alert mail Examples Type and contents of alert mail When PJ lamp replacement time is reached When lamp corres. value reaches preselect use time Enter place of the projector optional Snmp settingEnter user name of the projector etc. optional Community Item Description Check and delete the trap addressTrap Up to 10 trap addresses can be registered Trap option setting Trap option Chapter Controlling the Projector PJ temp Power control and status checkPJ status About projector condition Status Description Controls Input System Image adjustment Input source Sound Menu PC adjustment Table below Sets the image top/bottom and left/right Setting up the projectorNatural wide, True There may not be available Full Zoom Normal Natural wide True Execute button Lamp Corres. Value ResetSetting procedure Up to 18 characters can be used for the Memo Save the controls and settingsStore/free the settings Check the saved items Load a control set Set a day or date Timer settingHow to set the timer Set an execute time Check the timer eventsChange the event mode Select an event action Event Projector information Items Description Indication of the lamp status Status Example of multi control Controlling and setting the multi-projectorsMulti-control Multi control setting Start/stop the multi control Register the projector Enter projector name or installed location etcWord None is displayed if not using the Memo func- tion Confirmation of registered projector Status Change the mode of the registered projectorMode Operation Controlling all together Check & Change page in the light modeSetting all together Chapter Use of Serial Port Serial port setting Setting examples for the serial control Controlling AV equipment through network Control examplesExample Equipment PJ3 PJ2 PJ1 Preparation Use of telnetControl When the word Hello is replied, login has been succeeded Command Function Control the projector with telnet Chapter Appendix To another network Examples of connectionPeer-To-Peer connection Gateway Router installed in the network Entrance hall Flash Player enable Web browser settingActive Script/JavaScript enable Proxy setting Windows XP Professional ActiveX controls and plug-ins settingExamples OS/Browsers Internet Explorer Not using proxy server Flash Player Add-on settingUsing proxy server JavaScript Setting Netscape Navigator Proxy setting Product specification Mini DIN-8pin connector Port specificationPin modular connector RJ-45 Following causes are possible. Please check them Why doesn’t the setting page appear in my web browser?Projector setting Computer setting How can I restrict access from the computer What should I do when I forget the password? You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I develop a driver to control external serial equipment? Can I update the firmware of the network unit MAC address is indicated on the case back as the below What is the MAC address assigned to the network unit?What are the rules for IP address assignment? Ifff