E-mail setting

2 Registering and deleting E-mail addresses

Click "Add e-mail address" and type the e-mail address onto the text box and click Set button. To check the registered addresses, click Check/Delete sub menu tab. The addresses are listed as the figure on the right.

Up to 10 E-mail addresses can be registered.

Check / Delete

To delete the registered addresses, check the address you want to delete and click Delete button.

3Option selection for sending alert mail

Click Option sub menu tab. Check the condition items under which alert mail will be sent and click Set button.

Please refer to item "Examples :Type and contents of alert mail" described on the next page.

Option

[1]––––––––––––––––––––––––––––––––––

oWhen PJ lamp is off.

oWhen PJ lamp replacement time is reached.

oWhen internal PJ power circuit is failed.

oWhen internal PJ temperature is too high.

oWhen PJ is turned into Standby in proper user opera- tion.

[2]––––––––––––––––––––––––––––––––––

oWhen Power management function turns PJ lamp off.

oWhen the signal is interrupted.

[3]––––––––––––––––––––––––––––––––––

oWhen lamp Corres. Value reaches

[ ] hours. Attached message

The length of message should be less than 256 characters.

Up to 99,999 hours can be set for use time.

PJ-NET ORGANIZER OWNER'S MANUAL [PLV-80/75 Series]

ENGLISH

35

Page 35
Image 35
Sanyo POA-PN02C owner manual Registering and deleting E-mail addresses, Option selection for sending alert mail