Sanyo POA-PN02C owner manual System

Controls

System

This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu button according to the input signal. Select a sys- tem and then click Set button.

Available selection at the RGB(PC analog) input

Item	Description
XGA1	It automatically switches to the proper computer
	system of the input signal.
	* The computer system modes (VGA, SVGA, XGA.
	SXGA, UXGA, WXGA...) which meet the input sig-
	nal are listed.

Available selection at the RGB(PC digital) input

Item	Description
D-XGA	It automatically switches to the proper computer
	system of the input signal.
	* The computer system modes (D-VGA, D-SVGA,
	D-XGA. D-SXGA1...) which meet the input signal
	are listed.

Available selection at the Video/S-video/Scart input

Item	Description
AUTO	It automatically switches to the proper color sys-
	tem of the input signal.
	* The selectable color systems are PAL, SECAM,
	NTSC, NTSC4.43, PAL-M and PAL-N.
	* AUTO is fixed at the Scart input.

Available selection at the RGB(AV HDCP) input

Item	Description
AUTO	It automatically switches to the proper scanning
	system of the input signal.
	* The selectable scanning systems are D-480p,
	D-575p, D-720p, D-1035i and D-1080i.

Available selection at the Y,Pb/Cb,Pr/Cr input

Item	Description
AUTO	It automatically switches to the proper scanning
	system of the input signal.
		ENGLISH
	* The selectable scanning systems are 480i, 575i,
	480p, 575p, 720p, 1035i and 1080i.

✐If the mode (Mode1 to Mode 10, ExMode11 to ExMode50) which is stored in the item "PC Adjustment" (☞ p.48) is available, they are also listed together with the above mode.

PJ-NET ORGANIZER

OWNER'S MANUAL [PLV-80/75 Series]

45