Sanyo SAP-KRV94EHDX Removing the Negative Ion Generator, 2Secure the drain pan to the hook

(2)Secure the drain pan to the hook.

(2-1) Push up A and B in the figure one by one from underneath to secure them to the hook.

(2-2) Also secure C to the hook.

C.

B.

Bottom of left

back of the drain pan

A.

Bottom of right back of the drain pan

8-6. Removing the Negative Ion Generator

Remove the negative ion electrodes and negative ion

P.C.Board from the drain pan (Air Outlet Ass'y).

Negative ion electrodes

Negative ion P.C.Board

Remove the lead wire connector.

This connector was disconnected from the P.C. Board of the electrical component box.

Drain pan (Air Outlet Ass'y)

Negative ion P.C.Board

Negative ion electrodes

Scope of service supply

Cables cannot removed unless this part is removed.

Negative ion electrodes	Remove the ring
	connector.

NOTE The negative ion generator is supplied with a set of negative ion electrodes and negative ion P.C.Board.

35