Sanyo SAP-KRV94EHDX service manual Setting the Timer continued, REPEAT timer

Setting the Timer (continued)

3.How to set the ON time (Example) To start operation at 6:10.

	Operation		Indication
1.	Press the ON TIME setting	The timer	indication is
	button once.	displayed, and the present ON time
		is shown.
2.	Press the Advance, Return ( ,	The timer	indication blinks.
	) button until 6:10 is displayed.	The time can be set in 10-minute
		increments. Holding down the
		button advances the time rapidly in
		10-minute increments.
3.	Wait a few seconds, and then	The timer	indication stops
	the setting is complete.	blinking and the present time is
		displayed.

4.How to set DAILY ON/OFF (Example) To start operation at 6:10 and stop the air conditioner at 20:00.

REPEAT timer

22:30	6:10	20:00
Present time	ON	OFF

1.Select EVERYDAY by the TIMER selector button then set the ON/OFF timer times as shown in 2-1, 2, 3 and 3-1, 2, 3.

The present time 22:30 and are displayed.

NOTE

•The ON/OFF combination timer uses the current time as the reference, and it is activated starting from whichever set time comes first.

•With the ON/OFF combination timer, the settings are repeated every day.

•You can check the timer ON/OFF times after you have set them by pressing the ON TIME and OFF TIME setting buttons.

To cancel a timer program • Press the CANCEL button.

•When either an ON or OFF timer is to be canceled, press the button corresponding to the timer whose program is to be canceled, and then press the CANCEL button.

NOTE

•The airflow direction, fan speed and temperature setting can be changed after a timer program has been set even when the unit is stopped. Even when operation is stopped during an ON timer program, the unit will start operating when the set time is reached provided that the program is not canceled.

•When the ON timer and OFF timer are set to the same time, the timer operates as if it is turned off.

OI-791-19-EG 19