8-7. Removing and Mounting the Fan Motor
8-7-1. Removing the Fan Motor
Remove the electrical component box cover according to the previous section.
(1)Loosen the fan mounting screw with a hex wrench of 2.5mm opposite side distance.
(2)Remove three screws which secure the fan motor.
(3)While removing the fan motor mounting bracket,
pull out the fan motor shaft as well.
Fan mounting screw
(4)Remove the tab of the fan motor bracket and separate into two parts.
Tab
Hook
Fan
Fan mounting screw
Fan motor mounting bracket
Hex wrench ( Loosen the screw as you use ) a flashlight.
Fan motor bracket
Another hook also exists to this side.
8-7-2. Mounting the Fan Motor
To mount the fan motor, reverse the steps for removal.
Fan motor mounting bracket
Fan motor
| Fan |
|
|
|
| |
( | Hex wrench | ) |
| Fan motor lead wire |
| |
Fan mounting screw |
|
| ||||
3~4mm | Connect it with the wire |
| ||||
tightening torque: |
| |||||
(trailing down. | ) | |||||
| ||||||
|
|
| ||||
|
|
|
36
