Sanyo SAP-KRV94EHDX service manual 1Is the grille mounted in place?

10-6. Checking and Troubleshooting when the Front Panel fails to work

10-6-1. Checking the Front Panel when it fails to work during operation

(1)Is the grille mounted in place?

(Check in particular that the upper right screw is adequately tightened.)

Upper right screw

Grille

Screw

Flap

Screw cover

(2)Are the five levers on the rear of the front panel tightened?

The figure shows the loosened condition.

If the levers are in loosen, the front panel does not work correctly.

Front panel Sub-panel

LeverLever

Tighten Loosen Loosen Tighten

(3) Is the front panel correctly mounted?
1. Holding the part of the front panel adjacent to the arm.	2. Close the front panel, and
Next, press the arm shaft against the upper part of the	push at the arrow to firmly fix it.
groove which is located on the main body while
keeping the front panel almost horizontally, and push
it firmly until it makes a sound of being seated.
Front panel
(which is attached with a sub-panel on its rear side)

Groove	Groove
Arm shaft	Arm shaft
Arm	Arm

49