Sanyo VDC-HD3100/HD3100P specifications Working with Administrator Configuration Screens 15/50

1 SET : Click this button when finished configuring the camera settings you accessed by clicking each sub menu item.

2 CANCEL : Click this button before clicking SET to restore the previous settings.

3 DEFAULT : Click this button to reset the settings on the camera configuration screen to the defaults (factory settings).

4	HELP:	Click this to display a menu from which you can display the explanation of each configuration screen on the
		HELP screen.

Configuration Summary for Each Sub Menu Item

	Sub Menu	Operation	Application
1	VIEW	You can have two patterns of view settings (CAM1/CAM2) by configuring the	VIEW
		monitoring conditions through sub menu items “2 IRIS” to “11 PRIVACY MASK”.
2	IRIS	Configure the lens iris.	VIEW
3	WHITE	Adjust the white balance.	VIEW
	BALANCE
4	BLC	Configure the backlight compensation function.	VIEW
5	SHUTTER	Configure the electronic shutter.	VIEW
6	AGC	Configure the gain of the video signal.	VIEW
	DAY/NIGHT	Configure the Day/Night function that automatically switches the camera between color	VIEW
7		and black-and-white video modes depending on the luminance of the target.
		( (This function is supported only by VDC-HD3300P/VDC-HD3300.))
8	APERTURE	Configure the contour compensation function.	VIEW
9	VIVID COLOR	Configure the color saturation compensation function.	VIEW
	EFFECT
10	GAMMA	Configure the gamma correction level.	VIEW
11	DNR	Configure the noise reduction function.	VIEW
12	FOCUS ASSIST	Configure the focus assist function to adjust the focus.	Common
13	MIRROR	Configure the mirror function to flip the subject on the monitor.	Common
14	PRIVACY MASK	Configure the privacy mask settings to mask portions of the subject you want to hide	Common

for privacy protection.

“Application” in the above table means the following:

VIEW: The configured settings will be applied to “CAM1” or “CAM2”, whichever you selected under [VIEW].

Common: The configured settings will be applied commonly to “CAM1” and “CAM2” selected under [VIEW].

You can view how your changes affect the video image in real time.

You can configure two patterns of monitoring conditions.

For example, select “CAM1” to configure the normal live monitoring conditions for daytime use and select “CAM2” to configure the monitoring conditions with the Day/Night function for nighttime use, respectively. Thus, you can switch the monitoring conditions depending on your needs.

Working with Administrator Configuration Screens 15/50