Sanyo VDC-HD3300/HD300P specifications Working with Administrator Configuration Screens 40/50

1 In [MAIL ADDRESS], type the recipient e-mail addresses.

Here, you can type up to five e-mail addresses (up to 64 alphanumeric characters for each).

2 Select the check box for each e-mail address to which you want to send e-mails.

You can send e-mails to the selected e-mail address(es).

3 To attach an image file to an e-mail, select the [IMAGE] check box of the corresponding recipient address and click SET .

The attached image file will have the following file name:

CAMERA ID +_yymmddhhmmss.jpg

CAMERA ID is the leading four characters of the camera title. However, any of the following symbols, if included, will be replaced by a “-” (hyphen):

/(slash), \ (backslash), ? (question mark), * (asterisk), : (colon), ; (semicolon), ' (single quote), " (double quote), < (less-than sign), > (greater-than sign), ¦ (broken bar)

* To send a test e-mail, click TEST .

A test e-mail is sent to each recipient e-mail address for which you selected the check box in Step 2 .

The subject (SUBJECT) of this test e-mail will be “TEST”.

To perform an authentication check, you need to configure the authentication conditions.

1 In [AUTHENTICATION], select the authentication method.

NO USE, POP3, SMTP

Working with Administrator Configuration Screens 40/50