Sanyo VDC-HD3100/HD3100P, VDC-HD3300/HD300P specifications Before You Begin Network Operation 6/13

PC:

Operating system: CPU:

Memory:

Network interface: Display card: Graphics chip:

Web browser:

To operate the camera via network operation, you must meet the following operating requirements.

IBM PC/AT compatible

Windows XP Professional/Windows Vista

Core2Duo E6700 2.66 GHz or higher

Windows XP: 1GB or more

Windows Vista: 2GB or more

10BASE-T/100BASE-TX (RJ-45 connector)

1920×1200 pixels or higher

ATI RADEON HD2600 series or higher nVIDIA GeForce 8600 series or higher nVIDIA Quadro FX550 series or higher

Internet Explorer Ver. 6.0 SP2 or higher, or Internet Explorer Ver. 7.0

Use a LAN cable no longer than 100 m (109.4 yards) with the shield type CAT5 or higher. The live video may be delayed depending on your system environment.

Use Windows Update to keep the operating system and browser up-to-date.

Note, however, that Internet Explorer 8 is not supported.

In the cases below, configure the Internet Explorer's settings by clicking [Tool] and then [Internet Options].

When accessing the camera using SSL encryption for video signal transmission

1 Click the [Advanced] tab.

2 Make sure that the [Use SSL 2.0] and [Use SSL 3.0] check boxes under [Security] are selected. If deselected, select them.

When the video refresh is unstable 1 Click the [General] tab.

2 Under [Temporary Internet Files], click [Settings].

For Windows Vista, click [Settings] under [Browsing history].

3 Set the slider under [Amount of disk space to use:] to a low value (the minimum value recommended by Microsoft).

When a Java Script “Runtime Error” is displayed during operation 1 Click the [Advanced] tab.

2 Under [Browsing], deselect the [Display a notification about every script error] check box.

3 Select the [Disable script debugging] check box.

Before You Begin Network Operation 6/13