Installing the Printer Driver and Software

Setting up the PPD file

Preparation

Confirm that the printer is connected to an AppleTalk network before per- forming the following procedure.

AOn the Apple menu, select [Chooser].

BClick the [LaserWriter 8] icon.

3

C In the [Select a PostScript Printer] list, click to select the name of the printer

you want to use.

DClick [Create].

E Click to select the printer you want to use, and then click [Select].

The PPD file is set up, and the LaserWriter 8 icon appears at the left of the printer name on the list. Next, follow the procedure on p.28 “Setting up op- tions” to make the option settings, or close the [Chooser] dialog box.

Setting up options

AOn the Apple menu, select [Chooser].

BClick the [LaserWriter 8] icon.

C In the [Select the PostScript Printer] list, click to select the name of the printer you want to use, and then click [Setup].

DClick [Configure].

A list of options appears.

ESelect the option you want to set up and select the appropriate setting for it.

Note

If the option you want to set up does not appear, the PPD file has not been set up correctly. Check the name of the PPD file shown in the dialog box.

FClick [OK].

The list of options closes.

GClick [OK].

The [Chooser] dialog box appears.

HClose the [Chooser] dialog box.

28

Page 36
Image 36
Savin 1013 operating instructions Setting up the PPD file, Click the LaserWriter 8 icon, Click Create, Click Configure