Savin 1013 operating instructions System Settings Parameters, Default 60 minutes

Adjusting System Settings

System Settings Parameters

This section contains the information about the parameters used for the printer.

Reference

For more information about the other parameters in the System Settings menu, see the “System Settings” manual.

Menu	Description
1.Function Priority	You can specify the mode (Copier or Facsimile) to be displayed im-
	mediately after the operation switch is turned on or System Reset
	mode is turned on.

	Note
	❒ Default: Copier
3.System Reset	The machine returns to its prioritized mode automatically after
	your job is finished, when you selected the time. This function is
	called “System Reset”. The time can be set from 10 to 999 seconds,
	or no system reset.

	Note
	❒ Default: On (60 seconds)
	❒ You can specify the prioritized mode with the user tools. See
	“1.Function Priority”.
6.Auto Off Timer	The machine turns itself off automatically to conserve energy after
	your job is finished, after the selected time. This function is called
	“Auto Off ”. The time can be set from 1 to 240 minutes.

		Note
	❒ Default: 60 minutes
	❒ Auto Off might not be effective when an error message is dis-
		played.
	❒ To return to the ready condition from Auto Off, the machine re-
		quires the same warm-up time as the time for becoming ready
		after power is turned on.
	❒ When the machine receives a fax or printer data in Auto Off
		mode, it automatically prints the fax or the printer data.
13Measurement Unit	You can select the measurement unit.
	•	mm
	•	inch

Note

❒Default: mm

4

41