Setting Up the Printer Driver and Canceling a Print Job

Making printer settings from an application

To make the printer settings for a specific application, open the Printer Proper- ties dialog box from that application. The following example describes how to

1make settings for the WordPad application that comes with Windows NT 4.0.

Note

The actual procedure you should follow to open the Printer Properties dialog box may differ depending on the application. For more information, see the documentation that comes with the application you are using.

Any settings you make in the following procedure are valid for the current application only.

AOn the [File] menu, click [Print]. The [Print] dialog box appears.

BSelect the printer you want to use in the [Name] list box, and then click [Prop- erties].

The Printer Properties appear.

CMake any settings you require and click [OK].

DClick [OK] to start printing.

Macintosh - Setting Up for Printing

Making paper settings from an application

A Open the file you want to print.

BOn the [File] menu, click [Page Setup].

The [LaserWriter 8 Page Setup] dialog box appears.

C Confirm that the printer you want to use is shown in [Format for:] box. Then, use [Paper] to select the paper size you want to use.

Note

If the printer is not shown in the [Format for:] box, use the pop-up menu to display a list of available printers.

Reference

The actual appearance of the [Page Setup] dialog box depends on the appli- cation you are using. See the documentation that comes with the Macin- tosh for more information.

DAfter configuring the settings, click [OK].

10

Page 52
Image 52
Savin 1013 operating instructions Macintosh Setting Up for Printing, Making paper settings from an application