2.Configuring the Printer for the Network

Configuring the Printer for the Network with the Control Panel

After installing the optional Network Interface Board, configure it for the network using the printer's control panel.

If you use TCP/IP, you should assign the IP Address and Subnet Mask. You can also set the Gateway Address us- ing the printer's control panel.

Note

When you turn the machine's pow- er switch on, it may take a few minutes to initialize the optional Network Interface Board. If the “2. Network Setup” in the following step 4. is shaded, wait for a few minutes.

Reference

For more information about using this machine as a network printer, see the “Quick Configuration Guide” which is provided as a PDF file on the CD-ROM labeled “Op- erating Instructions for Printer”.

APress {User Tools/Counter}.

ABC DEF

BPress the 0 or 1key until the fol- lowing message appears on the panel display.

CPress {OK}.

The following screen appears on the panel display.

DPress the 0 or 1key until the fol- lowing message appears on the panel display.

EPress {OK}.

The following screen appears on the panel display.

FPress {OK}.

The following screen appears on the panel display.

GHI JKL MNO

13

Page 21
Image 21
Savin 1013 operating instructions Configuring the Printer for the Network, Press User Tools/Counter