Savin 4015, 4018d specs

KirC2_ENcopyF_FM.book Page 5 Monday, September 22, 2003 11:36 AM

RCAUTION:

•Protect the machine from dampness or wet weather, such as rain and snow.

•Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine.

•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

•Do not allow paper clips, staples, or other small metallic objects to fall inside the machine.

•Keep toner (used or unused) and toner bottle out of the reach of children.

•For environmental reasons, do not dispose of the machine or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer.

•The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot surface”. Otherwise, an injury might occur.

•Keep the machine away from humidity and dust. Otherwise a fire or an elec- tric shock might occur.

•Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

•Before moving the machine, be sure to pull all four handles fully out. If not, an injury might occur. After moving the machine, return the four handles to their original positions.

•When the optional paper tray unit is installed, do not push the upper part of the main unit horizontally. An injury might occur if the paper tray unit be- comes detached from the main unit.

•If you use the machine in a confined space, make sure there is a continuous air turnover.

5

Image 13

Savin 4015, 4018d manual

Contents

Copy Reference Introduction Manuals for This Machine Manuals for ScanRouter V2 Lite Manuals for DeskTopBinder V2 LiteOther manuals Table of Contents Settings You Can Change with User Tools Accessing User Tools Copier FeaturesDos and Donts Where to Put Your Machine If Your Machine Does Not Operate As You Want Combination Chart Supplementary Information SpecificationsPage Page Remarque concernant les utilisateurs au Canada Avertissement Symbols How to Read This ManualNames of Major Options Safety During Operation Safety InformationPage AAI029S Machine Types Control Panel Options fully installedCopier only Combine/Series key Cancel keySort key Lighter and Darker Display Reading the Display and Using KeysInitial copy display Scroll keys Turning On the Main Power Turning On the PowerTurning On the Power Operation switch right side of the control panel Turning Off the Main Power Turning Off the Power Saving Energy Auto Off/ Low Power Originals Sizes and Weights of Recommended OriginalsMetric version Inch version Sizes Detectable with Auto Paper Select Exposure glass Missing Image AreaADF or Ardf Sizes difficult to detect Original Orientation Placing OriginalsPlacing Originals on the Exposure Glass Limit mark Document guide Ardf Placing custom size originals To switch between pages or select functions Basic ProcedureTo stop the machine during a multi- copy run To clear an entered value Open the bypass tray Copying from the Bypass TrayPush up the paper guide release lever Paper guide release lever Select Regular Size using U or T, and then press the OK key Select Paper Size using U or T, and then press the OK keyHorizontal size Vertical size Extender Paper guides Pull down the paper guide release the lever step B Select Custom Size using U or T, and then press the OK key Select Paper Size using U orFeeds Then press the OK Select Thick Paper using U or T, and then press the OK key Selecting Original Type Setting Adjusting Image DensityCopier Functions Selecting Copy Paper Select the paper tray or bypass tray using U or T Preset Reduce/EnlargeMake sure Auto Paper Select is se- lected Base Point ZoomPress Reduce or Enlarge Auto Reduce/Enlarge Adjust the ratio using U or TEnter the ratio Press the OK key Rotate Sort SortSort Sided → 2 Sided Duplex Type 3 onlySided → 2 Sided Optional Ardf is required Select Sort or Rotate Sort, and then press the OK key Press the Duplex key Original orientation and completed copies Sided 2 Pages → Combine 1 Side One-Sided CombineSided 4 Pages → Combine 1 Side Sided 1 Page → Combine 1 Side Optional Ardf is required Position of combine Optional Ardf is requiredSided 2 Pages → Combine 1 Side Orientation of the original and image Sided 8 Pages → Combine 2 Side Two-Sided Combine Type 3 onlySided 4 Pages → Combine 2 Side Optional Ardf is required Sided 4 Pages → Combine 2 Side Then press the OK key Top or Top to Bottom using U or Sided→1 Sided Optional Ardf is required Series CopiesBook→1 Sided Press the Combine/Series key Place your original, and then press the Start key Select the paper tray using U or T If Your Machine Does Not Operate As You Want When a Message Is Displayed If You Cannot Make Clear Copies Problem Causes Solutions Basic If You Cannot Make Copies As You WantEdit Combine Duplex Type 3 only When Memory Is Full Loading Paper Loading PaperPush the paper tray in, until it stops Original Orientation Orientation-Fixed Paper or Two-Sided Paper Loaded paper orientation For MFP Handling Toner Adding TonerToner Storage Used Toner Removing Toner Inserting Toner Troubleshooting Changing Default Settings Accessing User Tools Copier FeaturesPress the User Tools/Counter key Change is made, and the ma- chine is ready to copy Quitting User Tools Auto Tray Switching Settings You Can Change with User ToolsOriginal Type Setting APS/ Auto R/E Priority Orientation Duplex Mode PriorityMax. Number of Sets Original Count Display Letterhead Setting Preset R/E PriorityDuplex Margin Rotate Sort User Tools Copier Features Dos and Donts Remarks Machine Environment Where to Put Your MachineOptimum environmental conditions Environments to avoid Moving Power Connection Access to the Machine Cleaning the Exposure Glass Cover Cleaning the Exposure GlassCleaning the ADF or Ardf Cleaning the machine Remarks Combination Chart Specifications Supplementary Information Preset Enlarge/ReduceBypass Tray Copy Sort, Rotate Sort Zoom Duplex Margin Type 3 only Index Combine, 34 orientation Orientation and completed copies Adding Handling Inserting Removing Storage Used Memo Means Power on EN USA B121-6607